Toyota Corolla Cross: Data List / Active Test
DATA LIST / ACTIVE TEST
DATA LIST
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
HINT:
Using the GTS to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
(a) Read the Data List according to the display on the GTS.
Body Electrical > Main Body > Data List|
Tester Display | Measurement Item |
Range | Normal Condition |
Diagnostic Note |
|---|---|---|---|---|
|
FR Door Lock Position Switch Status |
Front door RH unlock detection switch signal |
Lock or Unlock | Lock: Front door RH locked Unlock: Front door RH unlocked |
- |
| FL Door Lock Position Switch Status |
Front door LH unlock detection switch signal |
Lock or Unlock | Lock: Front door LH locked Unlock: Front door LH unlocked |
- |
| RR Door Lock Position Switch Status |
Rear door RH unlock detection switch signal |
Lock or Unlock | Lock: Rear door RH locked Unlock: Rear door RH unlocked |
- |
| RL Door Lock Position Switch Status |
Rear door LH unlock detection switch signal |
Lock or Unlock | Lock: Rear door LH locked Unlock: Rear door LH unlocked |
- |
| Back Door Lock Position Status |
Back door lock signal |
Lock or Unlock | Lock: Back door locked Unlock: Back door unlocked |
- |
| FR Door Courtesy Switch Status |
Front door courtesy light switch assembly RH signal |
Close or Open | Close: Front door RH closed Open: Front door RH open |
- |
| FL Door Courtesy Switch Status |
Front door courtesy light switch assembly LH signal |
Close or Open | Close: Front door LH closed Open: Front door LH open |
- |
| RR Door Courtesy Switch Status |
Rear door courtesy light switch assembly RH signal |
Close or Open | Close: Rear door RH closed Open: Rear door RH open |
- |
| RL Door Courtesy Switch Status |
Rear door courtesy light switch assembly LH signal |
Close or Open | Close: Rear door LH closed Open: Rear door LH open |
- |
| Back Door Courtesy Switch Status |
Back door courtesy light switch signal |
Close or Open | Close: Back door closed Open: Back door open |
- |
| IGR Power |
IGR signal | OFF or ON |
OFF: Ignition switch off ON: Ignition switch ON |
- |
| Key Unlock Warning Switch |
Unlock warning switch |
OFF or ON | OFF: Ignition key not inserted ON: Ignition key inserted |
- |
ACTIVE TEST
HINT:
Using the GTS to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Perform the Active Test according to the display on the GTS.
Body Electrical > Main Body > Active Test|
Tester Display | Measurement Item |
Control Range | Diagnostic Note |
|---|---|---|---|
|
Door Lock | Door lock motor |
OFF or ON | - |
|
Door Unlock | Door lock motor |
OFF or ON | - |
|
D-Door Unlock | Door lock motor |
OFF or ON | - |
|
Trunk Lid / Back Door Open |
Back door lock motor |
OFF or ON | - |
|
Wireless Buzzer | Wireless door lock buzzer |
OFF or ON | - |
READ NEXT:
Only Wireless Control Function is Inoperative
DESCRIPTION The door control receiver receives signals from the door control transmitter assembly and sends these signals to the main body ECU (multiplex network body ECU). The main body ECU (multiple
No Answer-Back
DESCRIPTION In some cases, wireless door lock control functions are normal but the hazard warning light and wireless door lock buzzer answer-back function do not operate. In such cases, hazard warning
SEE MORE:
End Position Initial Setting
END POSITION INITIAL SETTING
CAUTION / NOTICE / HINT
Perform end position initial setting after replacing or servicing parts related
to steering operation.
NOTICE:
If matchmarks were not placed when removing parts related to steering operation,
perform end position initial setting.
Right Rear Wheel Speed Sensor Signal Stuck Low (C051223)
DESCRIPTION
Refer to DTC C051212
Click here
DTC No.
Detection Item
DTC Detection Condition
Trouble Area
C051223
Right Rear Wheel Speed Sensor Signal Stuck Low
When the vehicle is driven from 0 km/h to 12 km/
