Toyota Corolla Cross: Customize Parameters

CUSTOMIZE PARAMETERS

CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM

Click here

CUSTOMIZE SMART KEY SYSTEM (for Entry Function)

HINT:

The following items can be customized.

NOTICE:

• When the customer requests a change in a function, first make sure that the function can be customized.
• Record the current settings before customizing.

(a) Customizing with the GTS

(1) Enter the following menus: Customize Setting / Smart Key /Access.

(2) Select the setting by referring to the table below.

CUSTOMIZE WIRELESS DOOR LOCK CONTROL SYSTEM

Click here

CUSTOMIZING WITH THE MULTI-DISPLAY

(a) Customizing with the multi-display

(1) Turn the ignition switch ON.

(2) Enter the following menus: [Settings] → [Vehicle customize] → [Door control]

(3) Enter the following menus: [Settings] → [Vehicle customize] → [Utility]

NOTICE:

Before performing an inspection, Customize Setting item ACC customize is set to ON.

HINT:

*: To facilitate transportation of the vehicle, the default setting of the certification ECU (smart key ECU assembly) is "ON". However, as the recommended setting is "OFF", the setting is changed to "OFF" at the dealer when the vehicle is delivered.

ENTRY UNLOCK MODE CHANGE FUNCTION

(a) Entry unlock mode change function (manual operation)

(1) The following entry unlock modes can be selected when using the entry unlock mode change function.

• All door unlock mode: When the unlock sensor of a front door outside handle assembly is touched, all of the doors are unlocked simultaneously.
• Driver door unlock mode: When the unlock sensor of the front door outside handle assembly (for driver door) is touched, only the driver door is unlocked. If any other door door outside handle assembly is touched, all of the doors are unlocked simultaneously.

(2) When customizing through manual operation:

1. Turn the ignition switch off.
2. Check that the LED of the electrical key transmitter sub-assembly is not illuminated, and then press and hold the lock and unlock switches of the electrical key transmitter sub-assembly for 5 seconds or more while the electrical key transmitter sub-assembly is in the exterior detection area.
3. Check the current setting.

   HINT:

   • The mode changes from all door unlock mode to driver door unlock mode and then back to all door unlock mode.
   • The answer-back (wireless buzzer) operation for each mode is indicated in the table below.

     Currently Selected Mode	Answer-back (Wireless Buzzer)
     All door unlock mode	Buzzer sounds twice (short beeps)
     Driver door unlock mode	Buzzer sounds 3 times (short beeps)

4. Release the lock and unlock switches of the electrical key transmitter sub-assembly.
5. Check that the LED of the electrical key transmitter sub-assembly is not illuminated, and then press and hold the lock and unlock switches of the electrical key transmitter sub-assembly for 5 seconds or more to change the mode.

   HINT:

   Repeat the procedure as necessary to select the desired mode.

6. Unlock the doors using the wireless function, and then open any door.

ENTRY CANCEL FUNCTION

(a) Entry cancel function (manual operation)

HINT:

While the smart key system is canceled, it is possible to lock and unlock the doors with the wireless function, and the hybrid control system can be started by holding the electrical key transmitter sub-assembly near the power switch.

(1) The following functions are disabled when the smart key system is canceled.

1. Entry unlock/lock functions
2. Push-button start function
3. Key lock-in prevention function
4. Entry warning functions

(2) When canceling the smart key system through manual operation:

1. Make sure the following conditions are met:
   • The ignition switch is off.
   • The driver door is closed.
   • The driver door is unlocked.

(3) Press the unlock switch of the electrical key transmitter sub-assembly.

(4) Open the driver door within 5 seconds of completing the step above (driver door: closed → opened).

(5) With the driver door open, press the unlock switch of the electrical key transmitter sub-assembly 2 times within 5 seconds of completing the step above.

NOTICE:

If the driver door is closed before or while pressing the unlock switch, the entry cancel setting mode will end.

(6) Perform the following procedure within 30 seconds of completing the step above.

1. Close and open the driver door twice (driver door: open → closed → opened → closed → opened).
2. With the driver door open, press the unlock switch of the electrical key transmitter sub-assembly 2 times.

   NOTICE:

   If the driver door is closed before or while pressing the unlock switch, the entry cancel setting mode will end.

3. Close and open the driver door (driver door: open → closed → opened).

(7) Close the driver door within 5 seconds (driver door: open → closed).

(8) Check that the wireless buzzer sounds twice (short beeps) to confirm that the smart key system has been canceled.

(9) Perform the following procedure to restore the smart key system to the active state from the canceled state.

1. Perform the procedure to cancel the smart key system again.
2. Check that the wireless buzzer sounds once (short beep) to confirm that the smart key system has been restored to the active state.

   HINT:

   • The system changes between the canceled state and the active state each time the procedure to cancel the system through manual operation is performed.
   • The buzzer sounds twice when the system changes from the active state to the canceled state, and sounds once when the system changes from the canceled state to the active state.

READ NEXT: