Toyota Corolla Cross: Customize Parameters
CUSTOMIZE PARAMETERS
CUSTOMIZE AIR CONDITIONING SYSTEM
(a) Customizing with the GTS.
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Be sure to make a note of the current settings before customizing.
- When troubleshooting a function, first make sure that the function is set to the default setting.
HINT:
The following items can be customized.
(1) Select the setting by referring to the table below.
Air Conditioner|
Tester Display | Description |
Default | Setting |
ECU |
|---|---|---|---|---|
| Fan Speed Increment Control |
Function to set the speed to reach the target blower fan speed when AUTO mode is on |
Normal | $01:Short,$00:Normal,$02:Long |
Air conditioning amplifier assembly |
|
Outside Air Mode Auto Switch Function |
Function to automatically change the air inlet to FRESH mode when the ignition switch is off for 60 seconds |
ON | $00:OFF,$01:ON |
Air conditioning amplifier assembly |
|
Evaporator Control | Function to set the evaporator control to the automatic position (Automatic) to save power or to the coldest position (Manual) to dehumidify the air and to prevent the windows from fogging up |
Automatic | $00:Manual,$01:Automatic |
Air conditioning amplifier assembly |
|
Refrigerant Shortage Check |
Function to cancel the refrigerant shortage check (check performed during normal operation) when set to ON |
ON | $00:OFF,$01:ON |
Air conditioning amplifier assembly |
|
Ambient Temperature Adjustment |
Function to control with the shifted ambient temperature against the display ambient temperature |
ON | $04:-3C,$05:-2C,$06:-1C,$00:Normal,$01:+1C,$02:+2C,$03:+3C |
Air conditioning amplifier assembly |
READ NEXT:
Initialization
INITIALIZATION SERVO MOTOR INITIALIZATION (a) Press the OFF switch.
(b) According to the GTS display, perform servo motor initialization. Body Electrical > Air Conditioner > Utility
Te
Utility
UTILITY REFRIGERANT SHORTAGE CHECK USING GTS (a) Check that the following conditions are met and perform the refrigerant shortage check according to the display on the GTS. Measurement Condition:
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE
NOTICE:
Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in ord
SEE MORE:
Security Indicator Light Does not Blink
DESCRIPTION
The certification ECU (smart key ECU assembly) blinks the security indicator light (air conditioning control assembly) when the immobiliser is set (ignition switch off).
The certification ECU (smart key ECU assembly) receives the security indicator light signal from the main bo
Front Passenger Side Door Entry Lock Function does not Operate
DESCRIPTION If the entry lock function does not operate for the front passenger door only, but the entry unlock function operates, the request code is being transmitted properly from the for passenger door. In this case, there may be a problem related to the lock sensor (connection between the certi
